Item # RE30AJ200F, 30 mm Round Shaft Incremental Rotary Encoder (Open Collector Output - 200 P/R)

30 mm mounting size and round shaft define the mechanical fit: the mating bracket and coupling must be selected for this посадочный размер and shaft form, not by housing appearance. Resolution 200 P/R with incremental output gives position information as pulse sequence rather than absolute position; Phase A, Phase B, Phase Z: 3 Channels means the receiving electronics must accept quadrature channels plus index. Output Open Collector requires matching the input circuit and pull-up arrangement to the selected Power Supply 5~24 VDC ± 10%.

100 kHz max. response frequency and 6000 r/min maximum speed are limiting electrical and rotational parameters: the controller input must reliably count pulses at this frequency, otherwise the mechanical speed capability will not be usable in practice. Current Consumption 18 mA max. and Max. Draw Current 30 mA set the load for the power supply and output circuit; Output Voltage Low 0.5 VDC max. is the low-level threshold to check against the input specification of the connected device. Angular Accuracy ±0.36˚ indicates the positioning error to account for in motion control or measurement tasks.

10~55 Hz vibration with double amplitude 1.5 mm for 2 hours each in X, Y, and Z directions, plus shock 490 m/s 2 11 ms in X, Y, Z directions; 3 times each, describes the mechanical durability tests rather than unrestricted use under any vibration. Permissible Radial Load 10 N and Permissible Axial Load 5 N are direct shaft-load limits: coupling misalignment or axial preload must stay within these values. Mass 33 g and inertia 1.0×10 −7 kg·m² are relevant for small drive assemblies where added rotating load affects acceleration and servo tuning.