Item # DR28T2.5B03-P2AKR-P, 28 mm Table Type Compact Electric Cylinder

28 mm frame size, Table Type execution and Foot Mount mounting define a compact table configuration with an equipped guide and right cable direction. Precision Ball Screw with 2.5 mm lead and 30 mm stroke is oriented toward controlled linear motion over a short travel; minimum travel amount 0.0125 mm and lost motion 0.02 mm max. show the scale of commanded movement and mechanical reversal error that must be considered when setting approach positions.

2 kg max. vertical transportable mass and 4 kg max. horizontal transportable mass mean the allowable load depends on installation orientation; the same payload cannot be assumed for vertical and horizontal use. Max. speed is 100 mm/s, max. thrust force is 20 N, and max. holding force is 20 N; with Electromagnetic Brake: Not Equipped, retention should be evaluated from the stated holding force rather than from a brake function. Maximum load moment limits are M P : 0.3 N·m, M Y : 0.24 N·m, M R : 1.5 N·m, so off-axis loading must be checked separately for each moment direction.

Repetitive positioning accuracy is Table Tip on Ball Screw Shaft: ±0.003 mm and Upper Side of Linear Guide: ±0.005 mm mm, so the reference point affects the positioning tolerance used in the mechanical layout. PKP Series motor data are 1.5 A/phase, 1.77 VDC, 1.18 Ω/phase and 0.76±20% mH/phase; insulation resistance is 100 MΩ or more with 500 VDC megger, and dielectric strength is specified at 0.5 kV, 50 Hz or 60 Hz for 1 minute. Ambient limits are 32ºF ~ 104ºF (0ºC ~ 40ºC) nonfreezing and 85% or less noncondensing, so operation outside these stated conditions is not covered by the given data.