Item # DRL28PA1G-03, Compact Linear Actuator

1.1 in. 28 mm frame size and stroke 1.18 in. 30 mm indicate a compact actuator format with a short working travel: this is suitable where the mechanism needs fine linear positioning over a limited distance rather than long-axis movement. Resolution 0.000079 in. 0.002 mm is the key positioning parameter; with lead 0.039 in. 1 mm and drive method Rolled Ball Screw, the specification points to small commanded displacement increments, while the stroke remains the limiting factor for the available travel.

0.7 A current, max speed 0.94 in/s 24 mm/s, max thrust force 6.70 lb 30 N and max holding force 6.70 lb 30 N should be checked against the load profile: the actuator can both move and hold within the stated force value, but exceeding the transportable mass limits is outside the given specification. Max vertical transportable mass is 3.30 lb 1.5 kg, while max horizontal transportable mass is 2.20 lb 1 kg, so orientation matters and cannot be treated as interchangeable without recalculating the mechanical load conditions.

32ºF ~ 104ºF (0ºC ~ 40ºC) ambient temperature and 85% or less ambient humidity define the operating environment: freezing and condensation are explicitly excluded, so installation near cold zones or moisture-prone areas requires environmental control. Lead wires 5 is a direct wiring constraint for integration; the electrical connection should be planned around this lead count rather than assuming a different connector or interface.